Modeling and Simulation of a Modified Solar Air Heater Destined to Drying the Gelidium Sesquipedale
Abstract
The open-air solar drying is a traditional method used for drying Gelidium sesquipedale in Morocco, an important commercial maritime specie of red algae existing in abundant quantities in the large Moroccan coast between Safi and EL jadida. However, this method is not professional and is time-consuming. Here, we present a modified design of a solar air heater destined to use as a component in an indirect solar dryer of Gelidium sesquipedale. We report the results of simulation of the thermal behavior of a modified simple back-pass solar collector in order to predict parameters influencing its thermal performances, such as the number and the diameter of perforations in the configuration, the airflow rate, the solar irradiance. To achieve this, a 3D simulation with finite element model (FEM) is built using the meteorological data collected at the chosen location during the regular harvesting period (July, August and September). The results show that the optimal simulated configuration of a flat plate solar collector is of seven symmetrical perforations of 30 mm diameter, and mass airflow rate around 60kg/h. The best conditions for drying algae are achieved using a solar collector facing south and inclined by 20° to the horizontal. The air outlet temperature will be in the range of 35 to 44°C that is relevant for low temperature drying of seven hours a day, safeguarding the quality of the red algae destined for processing.
Keywords
Full Text:
PDFReferences
M. R. Vignon, C. Rochas, R. Vuong, P. Tekely, and H. Chanzy, “Gelidium sesquipedale (Gelidiales, Rhodo-phyta) Π. An Ultrastructural and Morphological Study,†Bot. Mar., vol. 37, p. 10, 1994.
O. Iglesias and J. L. Bueno, “Water agar-agar equilib-rium: determination and correlation of sorption iso-therms,†Int. J. Food Sci. Technol., p. 8, 1999.
M. Kumar, S. K. Sansaniwal, and P. Khatak, “Pro-gress in solar dryers for drying various commodities,†Renew. Sustain. Energy Rev., vol. 55, pp. 346–360, Mar. 2016.
A. A. El-Sebaii and S. M. Shalaby, “Experimental Investigation of Drying Thymus Cut Leaves in Indi-rect Solar Dryer With Phase Change Material,†J. Sol. Energy Eng., vol. 139, no. 6, p. 061011, Sep. 2017.
E. M. Orbegoso, R. Saavedra, D. Marcelo, and R. La Madrid, “Numerical characterisation of one-step and three-step solar air heating collectors used for cocoa bean solar drying,†J. Environ. Manage., vol. 203, pp. 1080–1094, Dec. 2017.
L. Bennamoun, R. Khama, and A. Léonard, “Con-vective drying of a single cherry tomato: Modeling and experimental study,†Food Bioprod. Process., vol. 94, pp. 114–123, Apr. 2015.
S. Manaa, M. Younsi, and N. Moummi, “Study of Methods for Drying Dates; Review the Traditional Drying Methods in the Region of Touat Wilaya of Adrar-Algeria,†Energy Procedia, vol. 36, pp. 521–524, 2013.
A. Reyes, A. Mahn, and F. Vásquez, “Mushrooms dehydration in a hybrid-solar dryer, using a phase change material,†Energy Convers. Manag., vol. 83, pp. 241–248, Jul. 2014.
S. Vijayan, T. V. Arjunan, and A. Kumar, “Mathe-matical modeling and performance analysis of thin layer drying of bitter gourd in sensible storage based indirect solar dryer,†Innov. Food Sci. Emerg. Tech-nol., vol. 36, pp. 59–67, Aug. 2016.
A. Midilli, “Determination of pistachio drying behav-iour and conditions in a solar drying system,†Int. J. Energy Res., vol. 25, no. 8, pp. 715–725, Jun. 2001.
D. K. Rabha, P. Muthukumar, and C. Somayaji, “Ex-perimental investigation of thin layer drying kinetics of ghost chilli pepper (Capsicum Chinense Jacq.) dried in a forced convection solar tunnel dryer,†Re-new. Energy, vol. 105, pp. 583–589, May 2017.
S. Dhanushkodi, V. H. Wilson, and K. Sudhakar, “Mathematical modeling of drying behavior of cash-ew in a solar biomass hybrid dryer,†Resour.-Effic. Technol., vol. 3, no. 4, pp. 359–364, Dec. 2017.
Mahendra S. Seveda, “Design of a Photovoltaic Pow-ered Forced Convection Solar Dryer in NEH Region of India,†International Journal of Renewable Ener-gy Research, p. Vol. 3, No. 4, 2013.
D. Parikh and G. D. Agrawal, “Solar Drying In Hot and Dry Climate of Jaipur, India,†International Journal of Renewable Energy Research, p. Vol. 1, N.4, 224-231, 2011.
M. Aziz, T. Oda, and T. Kashiwagi, “Energy-efficient algae utilization based on enhanced process integra-tion,†2013 International Conference on Renewable Energy Research and Applications (ICRERA), Ma-drid, Spain, pp. 395–400, Oct-2013.
L. Ait Mohamed, C. S. Ethmane Kane, M. Kouhila, A. Jamali, M. Mahrouz, and N. Kechaou, “Thin layer modelling of Gelidium sesquipedale solar drying pro-cess,†Energy Convers. Manag., vol. 49, no. 5, pp. 940–946, May 2008.
F. Jafarkazemi and E. Ahmadifard, “Energetic and exergetic evaluation of flat plate solar collectors,†Renew. Energy, vol. 56, pp. 55–63, Aug. 2013.
M. A. Leon and S. Kumar, “Mathematical modeling and thermal performance analysis of unglazed tran-spired solar collectors,†Sol. Energy, vol. 81, no. 1, pp. 62–75, Jan. 2007.
Mohamed H. Ahmed, Alberto Giaconia, and Amr M. A. Amin, “Effect of solar collector type on the ab-sorption system performance,†2017 IEEE 6th Inter-national Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, USA, 05-Nov-2017.
O. K. A. Ahmed, “Assessment of the Performance for a New Design of Storage Solar Collector,†Interna-tional Journal of Renewable Energy Research, p. Vol.8, No.1, Mar-2018.
M. Demirtas, M. Yesilbudak, S. Sagiroglu, and I. Colak, “Prediction of solar radiation using meteoro-logical data,†in 2012 International Conference on Renewable Energy Research and Applications (ICRERA), Nagasaki, Japan, 2012, pp. 1–4.
Surface meteorology and Solar Energy, “A renewable energy resource web site (release 6.0).†(https://eosweb.larc.nasa.gov/.
Ahmad M.A.M. Serag Eldin et al, “Effect of dust deposition on performance of thin film photovoltaic Module in Harsh Humid Climate,†2013 Int. Conf. Renew. Energy Res. Appl. ICRERA, pp. 674–679, Oct. 2013.
M. A. Abdelrahman, S. A. M. Said, and A. N. Shuaib, “Comparison between atmospheric turbidity coeffi-cients of desert and temperate climates,†Sol. Energy, vol. 40, no. 3, pp. 219–225, 1988.
D. Djafer and A. Irbah, “Estimation of atmospheric turbidity over Ghardaïa city,†Atmospheric Res., vol. 128, pp. 76–84, Jul. 2013.
A. Louche, G. Peri, and M. Iqbal, “An analysis of linke turbidity factor,†Sol. Energy, vol. 37, no. 6, pp. 393–396, 1986.
C. P. De Brichambaut and C. Vauge, Le gisement solaire : évaluation de la ressource énergétique, Tec et doc. Paris- France, 1982.
M. Jazayeri, S. Uysal, and K. Jazayeri, “A case study on solar data collection and effects of the sun’s posi-tion in the sky on solar panel output characteristics in Northern Cyprus,†in 2013 International Conference on Renewable Energy Research and Applications (ICRERA), Madrid, Spain, 2013, pp. 184–189.
K. S. Ong, “Thermal performance of solar air heaters: mathematical model and solution procedure,†p. 17, 1995.
K. S. Ong, “Thermal performance of solar air heaters experimental correlation,†Solar Energy, pp. 209–220, 1995.
A. V. Rabadiya and R. Kirar, “Comparative Analysis of Wind Loss Coefficient (Wind Heat Transfer Coef-ficient) For Solar Flat Plate Collector.,†vol. 2, no. 9, p. 6, 2012.
J. H. Ferziger and M. Perić, Computational methods for fluid dynamics, 3rd, rev. ed ed. Berlin ; New York: Springer, 2002.
R. Bird, W. E. Stewart, and E. N. Lightfoot, Transport phenomena, 2nd, Wiley international ed ed. J. Wiley, 2002.
Thermography infrared, “http://www.thethermograpiclibrary.org.†01-Jul-2017.
DOI (PDF): https://doi.org/10.20508/ijrer.v8i4.8337.g7555
Refbacks
Online ISSN: 1309-0127
Publisher: Gazi University
IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics);
IJRER has been cited in Emerging Sources Citation Index from 2016 in web of science.
WEB of SCIENCE in 2025;
h=35,
Average citation per item=6.59
Last three Years Impact Factor=(1947+1753+1586)/(146+201+78)=5286/425=12.43
Category Quartile:Q4