Classification of Jet Impingement Solar Collectors - A Recent Development in Solar Energy Technology

Muhammad Amir Aziat Bin Ishak, Adnan Ibrahim, Kamaruzzaman Sopian, Mohd Faizal Fauzan, Muhammad Aqil Afham Rahmat, Ag Sufiyan Abd Hamid

Abstract


Jet impingement mechanism has been extensively studied in previous research due to its ability to enhance the efficiency of a solar collector. The photovoltaic (PV) module temperature can be effectively lowered while preserving the temperature uniformity and enhance the solar collector performance. Since jet impingement offers such a broad application, numerous studies have focused on its heat transfer characteristic. This article provides a comprehensive review on recent jet impingement solar collectors. Additionally, the design and performance of the jet impingement cooling methods on solar air collectors, photovoltaic and photovoltaic thermal systems are discussed. The nozzle streamwise and spanwise pitch, nozzle to target spacing, nozzle diameter, nozzle shape, and Reynold number significantly impact the heat transfer properties of jet impingement. Research on applying single pass-single ducts using jet impingement is still lacking and needs further research. Thermally, a double pass-solar collector outperforms a single pass-solar collector due to the absorber plate's high heat extraction rate and more significant interaction caused by the doubled heat transfer surface.

Keywords


Jet impingement; Photovoltaic; Photovoltaic thermal; solar collector; Efficiency

Full Text:

PDF

References


Abdulhammed K. Hamzat, Ahmet Z. Sahin, Mayowa I. Omisanya, and Luai M. Alhems, "Advances in PV and PVT cooling technologies: A review," Sustain. Energy Technol. Assessments, vol. 47, no. May, p. 101360, 2021, doi: 10.1016/j.seta.2021.101360.

Wenbo Gu, Tao Ma, Salman Ahmed, Yijie Zhang, and Jinqing Peng, "A comprehensive review and outlook of bifacial photovoltaic (bPV) technology," Energy Convers. Manag., vol. 223, no. July, 2020, doi: 10.1016/j.enconman.2020.113283.

Zhicong Chen, Yixiang Chen, Lijun Wu, Shuying Cheng, Peijie Lin, and Linlin You, "Accurate modeling of photovoltaic modules using a 1-D deep residual network based on I-V characteristics," Energy Convers. Manag., vol. 186, no. March, pp. 168–187, 2019, doi: 10.1016/j.enconman.2019.02.032.

Tao Ma and Muhammad Shahzad Javed, "Integrated sizing of hybrid PV-wind-battery system for remote island considering the saturation of each renewable energy resource," Energy Convers. Manag., vol. 182, no. January, pp. 178–190, 2019, doi: 10.1016/j.enconman.2018.12.059.

M. Chandrasekar and T. Senthilkumar, "Five decades of evolution of solar photovoltaic thermal (PVT) technology – A critical insight on review articles," J. Clean. Prod., vol. 322, no. May, p. 128997, 2021, doi: 10.1016/j.jclepro.2021.128997.

Ali H. A. Al-Waeli, K. Sopian, Hussein A. Kazem, Jabar H. Yousif, Miqdam T. Chaichan, Adnan Ibrahim, Sohif Mat, and Mohd Hafidz Ruslan, "Comparison of prediction methods of PV/T nanofluid and nano-PCM system using a measured dataset and artificial neural network," Sol. Energy, vol. 162, no. January, pp. 378–396, 2018, doi: 10.1016/j.solener.2018.01.026.

Yuanlong Cui, Jie Zhu, Stamatis Zoras, and Jizhe Zhang, "Comprehensive review of the recent advances in PV/T system with loop-pipe configuration and nanofluid," Renew. Sustain. Energy Rev., vol. 135, no. April 2020, p. 110254, 2021, doi: 10.1016/j.rser.2020.110254.

Ali Ahmadkhani, Gholamabbas Sadeghi, and Habibollah Safarzadeh, "An in depth evaluation of matrix, external upstream and downstream recycles on a double pass flat plate solar air heater efficacy," Therm. Sci. Eng. Prog., vol. 21, no. May 2020, p. 100789, 2021, doi: 10.1016/j.tsep.2020.100789.

Adnan Ibrahim, Mohd Yusof Othman, Mohd Hafidz Ruslan, Sohif Mat, and Kamaruzzaman Sopian, "Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors," Renew. Sustain. Energy Rev., vol. 15, no. 1, pp. 352–365, 2011, doi: 10.1016/j.rser.2010.09.024.

Sébastien A. Brideau and Michael R. Collins, "Development and validation of a hybrid PV/Thermal air based collector model with impinging jets," Sol. Energy, vol. 102, pp. 234–246, 2014, doi: 10.1016/j.solener.2014.01.022.

Sébastien A. Brideau and Michael R. Collins, "Experimental model validation of a hybrid PV/thermal air based collector with impinging jets," Energy Procedia, vol. 30, pp. 44–54, 2012, doi: 10.1016/j.egypro.2012.11.007.

Win Eng Ewe, Ahmad Fudholi, Kamaruzzaman Sopian, Nilofar Asim, Yoyon Ahmudiarto, and Agus Salim, "Overview on Recent PVT Systems with Jet Impingement," Int. J. Heat Technol., vol. 39, no. 6, pp. 1951–1956, 2021, doi: 10.18280/ijht.390633.

Kyosung Choo, Brian K. Friedrich, Aspen W. Glaspell, and Karen A. Schilling, "The influence of nozzle-to-plate spacing on heat transfer and fluid flow of submerged jet impingement," Int. J. Heat Mass Transf., vol. 97, pp. 66–69, 2016, doi: 10.1016/j.ijheatmasstransfer.2016.01.060.

Seyfi ?evik and Mesut Abu?ka, "Enhancing the thermal performance of a solar air heater by using single-pass semi-flexible foil ducts," Appl. Therm. Eng., vol. 179, no. July, p. 115746, 2020, doi: 10.1016/j.applthermaleng.2020.115746.

F. K. Forson, M. A. A. Nazha, and Hobina Rajakaruna, "Experimental and simulation studies on a single pass, double duct solar air heater," Energy Convers. Manag., vol. 44, no. 8, pp. 1209–1227, 2003, doi: 10.1016/S0196-8904(02)00139-5.

Satyender Singh, "Experimental and numerical investigations of a single and double pass porous serpentine wavy wiremesh packed bed solar air heater," Renew. Energy, vol. 145, pp. 1361–1387, 2020, doi: 10.1016/j.renene.2019.06.137.

L. B. Y. Aldabbagh, F. Egelioglu, and M. Ilkan, "Single and double pass solar air heaters with wire mesh as packing bed," Energy, vol. 35, no. 9, pp. 3783–3787, 2010, doi: 10.1016/j.energy.2010.05.028.

D. H. Lee, Y. S. Chung, and S. Y. Won, "The effect of concave surface curvature on heat transfer from a fully developed round impinging jet," Int. J. Heat Mass Transf., vol. 42, no. 13, pp. 2489–2497, 1999, doi: 10.1016/S0017-9310(98)00318-4.

R. van Hout, V. Rinsky, N. Sasson, C. Hershcovich, M. Tshuva, and Y. J. Grobman, "Axisymmetric jet impingement on a dimpled surface: Effect of impingement location on flow field characteristics," Int. J. Heat Fluid Flow, vol. 74, no. September, pp. 53–64, 2018, doi: 10.1016/j.ijheatfluidflow.2018.09.010.

Ravish Vinze, Aniket Khade, Pramod Kuntikana, M. Ravitej, Batchu Suresh, V. Kesavan, and S. V. Prabhu, "Effect of dimple pitch and depth on jet impingement heat transfer over dimpled surface impinged by multiple jets," Int. J. Therm. Sci., vol. 145, no. June, p. 105974, 2019, doi: 10.1016/j.ijthermalsci.2019.105974.

Mohammad Salman, Ranchan Chauhan, and Sung Chul Kim, "Exergy analysis of solar heat collector with air jet impingement on dimple-shape-roughened absorber surface," Renew. Energy, vol. 179, pp. 918–928, 2021, doi: 10.1016/j.renene.2021.07.116.

Mohammad Salman, Myeong Hyeon Park, Ranchan Chauhan, and Sung Chul Kim, "Experimental analysis of single loop solar heat collector with jet impingement over indented dimples," Renew. Energy, vol. 169, pp. 618–628, 2021, doi: 10.1016/j.renene.2021.01.043.

Leonardo Goldstein Jr. and E. M. Sparrow, "Heat/Mass Transfer Characteristics for Flow in a Corrugated Wall Channel," J. Heat Transfer, vol. 99, no. 2, pp. 187–195, May 1977, doi: 10.1115/1.3450667.

Leonardo Goldstein Jr. and E. M. Sparrow, "Experiments on the Transfer Characteristics of a Corrugated Fin and Tube Heat Exchanger Configuration," J. Heat Transfer, vol. 98, no. 1, pp. 26–34, Feb. 1976, doi: 10.1115/1.3450464.

Wenfeng Gao, Wenxian Lin, Tao Liu, and Chaofeng Xia, "Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters," Appl. Energy, vol. 84, no. 4, pp. 425–441, 2007, doi: 10.1016/j.apenergy.2006.02.005.

M. Belusko, W. Saman, and F. Bruno, "Performance of jet impingement in unglazed air collectors," Sol. Energy, vol. 82, no. 5, pp. 389–398, 2008, doi: 10.1016/j.solener.2007.10.005.

Alsanossi M. Aboghrara, B. T. H. T. Baharudin, M. A. Alghoul, Nor Mariah Adam, A. A. Hairuddin, and Husam A. Hasan, "Performance analysis of solar air heater with jet impingement on corrugated absorber plate," Case Stud. Therm. Eng., vol. 10, no. May, pp. 111–120, 2017, doi: 10.1016/j.csite.2017.04.002.

Huan Zhang, Xintong Ma, Shijun You, Yaran Wang, Xuejing Zheng, Tianzhen Ye, Wandong Zheng, and Shen Wei, "Mathematical modeling and performance analysis of a solar air collector with slit-perforated corrugated plate," Sol. Energy, vol. 167, no. April, pp. 147–157, 2018, doi: 10.1016/j.solener.2018.04.003.

Wandong Zheng, Bojia Li, Huan Zhang, Shijun You, Ying Li, and Tianzhen Ye, "Thermal characteristics of a glazed transpired solar collector with perforating corrugated plate in cold regions," Energy, vol. 109, pp. 781–790, 2016, doi: 10.1016/j.energy.2016.05.064.

Mohit Singla, Vishavjeet Singh Hans, and Sukhmeet Singh, "CFD analysis of rib roughened solar evacuated tube collector for air heating," Renewable Energy, vol. 183. pp. 78–89, 2022. doi: 10.1016/j.renene.2021.10.055.

Varun, R. P. Saini, and S. K. Singal, "A review on roughness geometry used in solar air heaters," Sol. Energy, vol. 81, no. 11, pp. 1340–1350, 2007, doi: 10.1016/j.solener.2007.01.017.

Sukhmeet Singh, Bikramjit Singh, V. S. Hans, and R. S. Gill, "CFD (computational fluid dynamics) investigation on Nusselt number and friction factor of solar air heater duct roughened with non-uniform cross-section transverse rib," Energy, vol. 84, pp. 509–517, 2015, doi: 10.1016/j.energy.2015.03.015.

Anil Kumar, R. P. Saini, and J. S. Saini, "A review of thermohydraulic performance of artificially roughened solar air heaters," Renew. Sustain. Energy Rev., vol. 37, pp. 100–122, 2014, doi: 10.1016/j.rser.2014.04.063.

Anil Singh Yadav, Abhay Agrawal, Abhishek Sharma, and Abhay Gupta, "Revisiting the effect of ribs on performance of solar air heater using CFD approach," Materials Today: Proceedings. 2022. doi: 10.1016/j.matpr.2022.02.549.

Rahul Nadda, Anil Kumar, and Rajesh Maithani, "Developing heat transfer and friction loss in an impingement jets solar air heater with multiple arc protrusion obstacles," Sol. Energy, vol. 158, no. October, pp. 117–131, 2017, doi: 10.1016/j.solener.2017.09.042.

Rahul Nadda, Raj Kumar, Anil Kumar, and Rajesh Maithani, "Optimization of single arc protrusion ribs parameters in solar air heater with impinging air jets based upon PSI approach," Therm. Sci. Eng. Prog., vol. 7, no. October 2017, pp. 146–154, 2018, doi: 10.1016/j.tsep.2018.05.008.

Raj Kumar, Rahul Nadda, Sushil Kumar, Khusmeet Kumar, Asif Afzal, R. K. Abdul Razak, and Mohsen Sharifpur, "Heat transfer and friction factor correlations for an impinging air jets solar thermal collector with arc ribs on an absorber plate," Sustain. Energy Technol. Assessments, vol. 47, no. May, p. 101523, 2021, doi: 10.1016/j.seta.2021.101523.

Refat Moshery, Tan Yong Chai, Kamaruzzaman Sopian, Ahmad Fudholi, and Ali H. A. Al-Waeli, "Thermal performance of jet-impingement solar air heater with transverse ribs absorber plate," Sol. Energy, vol. 214, no. August 2020, pp. 355–366, 2021, doi: 10.1016/j.solener.2020.11.059.

Somayeh Davoodabadi Farahani and Milad Shadi, "Optimization-decision making of roughened solar air heaters with impingement jets based on 3E analysis," Int. Commun. Heat Mass Transf., vol. 129, p. 105742, 2021, doi: 10.1016/j.icheatmasstransfer.2021.105742.

Raj Kumar, Sushil Kumar, Rahul Nadda, Khusmeet Kumar, and Varun Goel, "Thermo-hydraulic efficiency and correlation development of an indoor designed jet impingement solar thermal collector roughened with discrete multi-arc ribs," Renew. Energy, vol. 189, pp. 1259–1277, 2022, doi: 10.1016/j.renene.2022.03.037.

Abhishek kumar Goel, S. N. Singh, and B. N. Prasad, "Experimental investigation of thermo-hydraulic efficiency and performance characteristics of an impinging jet-finned type solar air heater," Sustain. Energy Technol. Assessments, vol. 52, no. PB, p. 102165, 2022, doi: 10.1016/j.seta.2022.102165.

Abhishek Kumar Goel and S. N. Singh, "Experimental study of heat transfer characteristics of an impinging jet solar air heater with fins," Environ. Dev. Sustain., vol. 22, no. 4, pp. 3641–3653, 2020, doi: 10.1007/s10668-019-00360-1.

Mesut Abu?ka, "Energy and exergy analysis of solar air heater having new design absorber plate with conical surface," Applied Thermal Engineering, vol. 131. pp. 115–124, 2018. doi: 10.1016/j.applthermaleng.2017.11.129.

Mostafa M. Ibrahim, Mohamed A. Essa, and Nabil H. Mostafa, "A computational study of heat transfer analysis for a circular tube with conical ring turbulators," International Journal of Thermal Sciences, vol. 137. pp. 138–160, 2019. doi: 10.1016/j.ijthermalsci.2018.10.028.

Muhammed A. Hassan, Amro H. Al-Tohamy, and Amr Kaood, "Hydrothermal characteristics of turbulent flow in a tube with solid and perforated conical rings," International Communications in Heat and Mass Transfer, vol. 134. 2022. doi: 10.1016/j.icheatmasstransfer.2022.106000.

A. R. Anvari, K. Javaherdeh, M. Emami-Meibodi, and A. M. Rashidi, "Numerical and experimental investigation of heat transfer behavior in a round tube with the special conical ring inserts," Energy Conversion and Management, vol. 88. pp. 214–217, 2014. doi: 10.1016/j.enconman.2014.08.030.

Nitin Kumar, Anil Kumar, and Rajesh Maithani, "Development of new correlations for heat transfer and pressure loss due to internal conical ring obstacles in an impinging jet solar air heater passage," Therm. Sci. Eng. Prog., vol. 17, no. June 2019, p. 100493, 2020, doi: 10.1016/j.tsep.2020.100493.

Amit Kumar, Akshayveer, Ajeet Pratap Singh, and O. P. Singh, "Efficient designs of double-pass curved solar air heaters," Renew. Energy, vol. 160, pp. 1105–1118, 2020, doi: 10.1016/j.renene.2020.06.115.

Ho Ming Yeh, Chii Dong Ho, and Jun Ze Hou, "The improvement of collector efficiency in solar air heaters by simultaneously air flow over and under the absorbing plate," Energy, vol. 24, no. 10, pp. 857–871, 1999, doi: 10.1016/S0360-5442(99)00043-2.

Prashant Dhiman, N. S. Thakur, Anoop Kumar, and Satyender Singh, "An analytical model to predict the thermal performance of a novel parallel flow packed bed solar air heater," Appl. Energy, vol. 88, no. 6, pp. 2157–2167, 2011, doi: 10.1016/j.apenergy.2010.12.033.

Hiren U. Tandel and Kalpesh V. Modi, "Experimental assessment of double-pass solar air heater by incorporating perforated baffles and solar water heating system," Renew. Energy, vol. 183, pp. 385–405, 2022, doi: 10.1016/j.renene.2021.10.087.

Rahul Khatri, Shlok Goswami, Mohd Anas, Satvik Agarwal, and Shyam Sunder Sharma, "Design and material selection for sustainable development of a novel double pass solar air heater with porous fins," Mater. Today Proc., vol. 60, pp. 132–135, 2022, doi: 10.1016/j.matpr.2021.12.275.

A. F. Sharol, A. A. Razak, Z. A. A. Majid, M. A. A. Azmi, M. A. S. M. Tarminzi, Y. H. Ming, Z. A. Zakaria, M. A. Harun, A. Fazlizan, and K. Sopian, "Effect of thermal energy storage material on the performance of double-pass solar air heater with cross-matrix absorber," J. Energy Storage, vol. 51, no. March, p. 104494, 2022, doi: 10.1016/j.est.2022.104494.

R. K. Nayak and S. N. Singh, "Effect of geometrical aspects on the performance of jet plate solar air heater," Sol. Energy, vol. 137, pp. 434–440, 2016, doi: 10.1016/j.solener.2016.08.024.

Akhilesh Soni and S. N. Singh, "Experimental analysis of geometrical parameters on the performance of an inline jet plate solar air heater," Sol. Energy, vol. 148, pp. 149–156, 2017, doi: 10.1016/j.solener.2017.03.081.

Satyender Singh, Shailendra Kumar Chaurasiya, Bharat Singh Negi, Subhash Chander, Magdalena Nem?, and Sushant Negi, "Utilizing circular jet impingement to enhance thermal performance of solar air heater," Renew. Energy, vol. 154, pp. 1327–1345, 2020, doi: 10.1016/j.renene.2020.03.095.

Mohammad Salman, Ranchan Chauhan, Ganesh kumar Poongavanam, Myeong Hyun Park, and Sung Chul Kim, "Utilizing jet impingement on protrusion/dimple heated plate to improve the performance of double pass solar heat collector," Renew. Energy, vol. 181, pp. 653–665, 2022, doi: 10.1016/j.renene.2021.09.082.

Essam M. Abo-Zahhad, Shinichi Ookawara, Ali Radwan, A. H. El-Shazly, and M. F. El-Kady, "Numerical analyses of high concentrator triple-junction solar cell under jet impingement cooling," Energy Procedia, vol. 152, pp. 1051–1056, 2018, doi: 10.1016/j.egypro.2018.09.119.

Essam M. Abo-Zahhad, Shinichi Ookawara, Ali Radwan, A. H. El-Shazly, and M. F. ElKady, "Thermal and structure analyses of high concentrator solar cell under confined jet impingement cooling," Energy Convers. Manag., vol. 176, no. September, pp. 39–54, 2018, doi: 10.1016/j.enconman.2018.09.005.

Francesco Anglani, John Barry, and Willem Dekkers, "Development and Validation of a Stationary Water-Spray Cleaning System for Concentrated Solar Thermal (CST) Reflectors," Sol. Energy, vol. 155, pp. 574–583, 2017, doi: 10.1016/j.solener.2017.06.013.

Ahed Hameed Jaaz, Kamaruzzaman Sopian, and Tayser Sumer Gaaz, "Study of the electrical and thermal performances of photovoltaic thermal collector-compound parabolic concentrated," Results Phys., vol. 9, pp. 500–510, 2018, doi: 10.1016/j.rinp.2018.03.004.

J. Barrau, A. Perona, A. Dollet, and J. Rosell, "Outdoor test of a hybrid jet impingement/micro-channel cooling device for densely packed concentrated photovoltaic cells," Sol. Energy, vol. 107, pp. 113–121, 2014, doi: 10.1016/j.solener.2014.05.040.

Mohamed Awad, Ali Radwan, O. Abdelrehim, Mohamed Emam, Ahmed N. Shmroukh, and Mahmoud Ahmed, "Performance evaluation of concentrator photovoltaic systems integrated with a new jet impingement-microchannel heat sink and heat spreader," Sol. Energy, vol. 199, no. February, pp. 852–863, 2020, doi: 10.1016/j.solener.2020.02.078.

Hosny Abou-Ziyan, Mohammed Ibrahim, and Hala Abdel-Hameed, "Characteristics enhancement of one-section and two-stepwise microchannels for cooling high-concentration multi-junction photovoltaic cells," Energy Convers. Manag., vol. 206, no. August 2019, p. 112488, 2020, doi: 10.1016/j.enconman.2020.112488.

Essam M. Abo-Zahhad, Shinichi Ookawara, Ali Radwan, A. H. El-Shazly, and M. F. Elkady, "Numerical analyses of hybrid jet impingement/microchannel cooling device for thermal management of high concentrator triple-junction solar cell," Appl. Energy, vol. 253, no. July, p. 113538, 2019, doi: 10.1016/j.apenergy.2019.113538.

A. Torbatinezhad, M. Rahimi, A. A. Ranjbar, and M. Gorzin, "International Journal of Heat and Mass Transfer Performance evaluation of PV cells in HCPV / T system by a jet impingement / mini-channel cooling scheme," Int. J. Heat Mass Transf., vol. 178, p. 121610, 2021, doi: 10.1016/j.ijheatmasstransfer.2021.121610.

Hosny Abou-Ziyan, Mohammed Ibrahim, and Hala Abdel-Hameed, "Performance modeling and analysis of high-concentration multi-junction photovoltaics using advanced hybrid cooling systems," Appl. Energy, vol. 269, no. April, p. 115060, 2020, doi: 10.1016/j.apenergy.2020.115060.

Javad Mohammadpour, Fatemeh Salehi, Mohsen Sheikholeslami, and Ann Lee, "A computational study on nanofluid impingement jets in thermal management of photovoltaic panel," Renew. Energy, vol. 189, pp. 970–982, 2022, doi: 10.1016/j.renene.2022.03.069.

Anja Royne and Christopher J. Dey, "Design of a jet impingement cooling device for densely packed PV cells under high concentration," Sol. Energy, vol. 81, no. 8, pp. 1014–1024, 2007, doi: 10.1016/j.solener.2006.11.015.

Abdallah Ahmed, Edward Wright, Fawzy Abdel-Aziz, and Yuying Yan, "Numerical investigation of heat transfer and flow characteristics of a double-wall cooling structure: Reverse circular jet impingement," Appl. Therm. Eng., vol. 189, no. January, p. 116720, 2021, doi: 10.1016/j.applthermaleng.2021.116720.

Jérôme Barrau, Joan Rosell, Daniel Chemisana, Lounes Tadrist, and M. Ibañez, "Effect of a hybrid jet impingement/micro-channel cooling device on the performance of densely packed PV cells under high concentration," Sol. Energy, vol. 85, no. 11, pp. 2655–2665, 2011, doi: 10.1016/j.solener.2011.08.004.

M. M. Matheswaran, T. V. Arjunan, and D. Somasundaram, "Analytical investigation of solar air heater with jet impingement using energy and exergy analysis," Sol. Energy, vol. 161, no. October 2017, pp. 25–37, 2018, doi: 10.1016/j.solener.2017.12.036.

Siddhita Yadav and R. P. Saini, "Numerical investigation on the performance of a solar air heater using jet impingement with absorber plate," Sol. Energy, vol. 208, no. July, pp. 236–248, 2020, doi: 10.1016/j.solener.2020.07.088.

Ranchan Chauhan, Tej Singh, Nitin Kumar, Amar Patnaik, and N. S. Thakur, "Experimental investigation and optimization of impinging jet solar thermal collector by Taguchi method," Appl. Therm. Eng., vol. 116, pp. 100–109, 2017, doi: 10.1016/j.applthermaleng.2017.01.025.

Ranchan Chauhan and N. S. Thakur, "Heat transfer and friction factor correlations for impinging jet solar air heater," Exp. Therm. Fluid Sci., vol. 44, pp. 760–767, 2013, doi: 10.1016/j.expthermflusci.2012.09.019.

Ranchan Chauhan and N. S. Thakur, "Investigation of the thermohydraulic performance of impinging jet solar air heater," Energy, vol. 68, pp. 255–261, 2014, doi: 10.1016/j.energy.2014.02.059.

Ranchan Chauhan, Tej Singh, N. S. Thakur, and Amar Patnaik, "Optimization of parameters in solar thermal collector provided with impinging air jets based upon preference selection index method," Renew. Energy, vol. 99, pp. 118–126, 2016, doi: 10.1016/j.renene.2016.06.046.

Win Eng Ewe, Ahmad Fudholi, Kamaruzzaman Sopian, and Nilofar Asim, "Modeling of bifacial photovoltaic-thermal (PVT) air heater with jet plate," Int. J. Heat Technol., vol. 39, no. 4, pp. 1117–1122, 2021, doi: 10.18280/ijht.390409.

Ewe Win Eng., Ahmad Fudholi, Kamaruzzaman Sopian, Refat Moshery, Nilofar Asim, Wahidin Nuriana, and Adnan Ibrahim, "Thermo-electro-hydraulic analysis of jet impingement bifacial photovoltaic thermal (JIBPVT) solar air collector," Energy, vol. 254, p. 124366, 2022, doi: 10.1016/j.energy.2022.124366.

Husam Abdulrasool Hasan, Kamaruzzaman Sopian, Ahed Hameed Jaaz, and Ali Najah Al-Shamani, "Experimental investigation of jet array nanofluids impingement in photovoltaic/thermal collector," Sol. Energy, vol. 144, pp. 321–334, 2017, doi: 10.1016/j.solener.2017.01.036.

Abdulsalam S. Alghamdi, Abubakr S. Bahaj, Luke S. Blunden, and Yue Wu, "Dust removal from solar PV modules by automated cleaning systems," Energies, vol. 12, no. 15, 2019, doi: 10.3390/en12152923.

Mohammad Javidan and Ali Jabari Moghadam, "Experimental investigation on thermal management of a photovoltaic module using water-jet impingement cooling," Energy Convers. Manag., vol. 228, no. July 2020, p. 113686, 2021, doi: 10.1016/j.enconman.2020.113686.

Haitham M. S. Bahaidarah, "Experimental performance evaluation and modeling of jet impingement cooling for thermal management of photovoltaics," Sol. Energy, vol. 135, pp. 605–617, 2016, doi: 10.1016/j.solener.2016.06.015.

Husam Abdulrasool Hasan, Kamaruzzaman Sopian, and Ahmad Fudholi, "Photovoltaic thermal solar water collector designed with a jet collision system," Energy, vol. 161, pp. 412–424, 2018, doi: 10.1016/j.energy.2018.07.141.

Rajesh Maithani, Sachin Sharma, and Anil Kumar, "Thermo-hydraulic and exergy analysis of inclined impinging jets on absorber plate of solar air heater," Renew. Energy, vol. 179, pp. 84–95, 2021, doi: 10.1016/j.renene.2021.07.013.

T. Rajaseenivasan, S. Ravi Prasanth, M. Salamon Antony, and K. Srithar, "Experimental investigation on the performance of an impinging jet solar air heater," Alexandria Eng. J., vol. 56, no. 1, pp. 63–69, 2017, doi: 10.1016/j.aej.2016.09.004.




DOI (PDF): https://doi.org/10.20508/ijrer.v13i2.13884.g8755

Refbacks

  • There are currently no refbacks.


Online ISSN: 1309-0127

Publisher: Gazi University

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics);

IJRER has been cited in Emerging Sources Citation Index from 2016 in web of science.

WEB of SCIENCE in 2025; 

h=35,

Average citation per item=6.59

Last three Years Impact Factor=(1947+1753+1586)/(146+201+78)=5286/425=12.43

Category Quartile:Q4